Some Ideas on Termite Control Procedure You Should Know

The Termite Control Products PDFs


Mud tubesUnlike ants, termites do not ramble around on the soil surface or outside in the open. They will either tunnel through the soil or into wood (or other stuff ) or else travel inside pencil-size (or larger)"sand tubes" that they build from dirt, wood particles and other substances. You'll find these tubes on foundation walls, floor joists or other areas of the house.

What Does Termite Control Products Mean?What Does Termite Control Process Do?
Break open the tubes to determine if termites are still busy. An empty tube doesn't necessarily mean that termites are gone; they might have just abandoned this specific tunnel. Termites often rebuild damaged tubes, which can be another indication of current activity. 'Old' tubes are sterile and crumble easily, leaving behind"etching" on the surface that may be observable for decades (an indication that a home had termite activity at any time).

Tubes which are found on ceilings or on upper levels of a building may indicate that you have an aboveground ("airborne") infestation, i.e., the termite colony really lives in the building and the termites are traveling from the ground. Mud tubes built through an aboveground colony usually contain materials other than dirt, e.g., wood and sheet rock or anything the termites are feeding on.

The Best Strategy To Use For Termite Control ProcedureExcitement About Termite Control Process

The Single Strategy To Use For Termite Control Process


In such situations, a thorough inspection may necessitate removal of siding or interior wallboards, etc.. More importantly for you, these aboveground infestations cannot be controlled with the customary soil treatment (see below) and are generally excluded from a termite contract warranty. In such situations, finding and correcting the moisture problem is the first step to eliminating the termites. .

We tend to think about termites as feeding/injuring wood only. Termites really feed on almost anything which contains cellulose, the main component of wood, including wood paneling, paper products, cardboard boxes, art canvases, the paper covering of sheet rock, carpeting, etc.. While foraging and feeding, they could tunnel through non-cellulosic substances, such as plastic and foamboard.

Everything about Termite Control Process


In reality, the amount of harm that termites cause depends on many factors. In regions with cold winter temperatures, termite activity (and feeding) often declines, but does not necessarily stop. If the termites are well-protected from colder temperatures (e.g., underneath a slab), then action may continue year-round. From a practical standpoint, serious termite damage usually takes approximately 3-8 years. .

There's absolutely no accurate method for determining the era of recently discovered damage. You need some reference point, i.e., some point in time when it was known there was no damage to this particular wood. That is one reason why annual inspections (and keeping your records of these inspections) are important. .

NOTE: All these inspections are not a guarantee that you do not have termites or damage in areas that are not covered or not easily seen, such as inside walls. However, the inspections can reveal conditions that may suggest that harm does exist and further investigation is needed.

In case you've got a termite protection contract, contact the pest control company immediately and arrange for them to check out the problem. If you do not have a termite contract, telephone 2-3 (or more) companies and have each one inspect your house and provide you with the specifics of their findings and any recommendations for a course of action to correct any termite problems they found.

A Biased View of Termite Control Products


Termites do not cause significant harm in a brief time period, so spending a couple of extra days or even a few weeks will not make any real difference in terms how much damage occurs. .

Is there harm That Needs to Be repaired or examined by a contractor or engineer before control measures are performed

Simply spraying swarmers or the surface of available infested wood can kill the termites which you see now, but it does not block the infestation nor does it shield your home from potential attacks . The most common type of termite treatment involves a"trench and treat" in which a liquid insecticide ("termiticide") is placed on the soil surrounding crucial areas of your residence.

Termite Control Process Things To Know Before You Buy


The dirt is trenched 6" deep and approximately 4-6" wide. For houses with crawlspaces, look here the soil along the interior foundation wall must be treated at least within 4 feet of more info here identified signs of termite activity. In some cases, the soil around supports (such as piers) underneath the home can also be treated.

When implemented correctly, this treatment creates a continuous chemical barrier that should prevent termites from reaching the foundation and piers in your house. .

Concrete slabs that attach to the house, for example, a garage floor, or the slab of an earth-filled porch.

Leave a Reply

Your email address will not be published. Required fields are marked *